Hello,
I have a S40 2.0 Non-turbo, and I'm experiencing that the engine hesitates on acceleration and engine missfires when driving my car.
Well, I used a generic scanner and It gave me the codes:
P0351, P0352 (Ignition coils fault)
P0301, P0302, P0303 and P0304 (cylinder misfire).
After that I replaced:
-Ignition coils (both)
-The cable that come from to ECU to both ignition coils (because it looks toasted by the engine heat)
-The spark plug wires (for the two sparks)
-Spark plugs (all)
When I replaced all that, the engine is working with the same problem... and all the codes are still there !!.
Thanks if you can give me a clue of what's happening.
I have a S40 2.0 Non-turbo, and I'm experiencing that the engine hesitates on acceleration and engine missfires when driving my car.
Well, I used a generic scanner and It gave me the codes:
P0351, P0352 (Ignition coils fault)
P0301, P0302, P0303 and P0304 (cylinder misfire).
After that I replaced:
-Ignition coils (both)
-The cable that come from to ECU to both ignition coils (because it looks toasted by the engine heat)
-The spark plug wires (for the two sparks)
-Spark plugs (all)
When I replaced all that, the engine is working with the same problem... and all the codes are still there !!.
Thanks if you can give me a clue of what's happening.
