 1992 240gl, will not start |
|
 |
||||||||||||||||||
 |
|
|||||||||||||||||
 |
 |
|
||||||||||||||||
 |
||||||||||||||||||
  |
|
| Do you like Volvo-Forums.com? Link to us and help spread the word about our forum. Thanks! | |
| 1992 240gl, will not start |
 Aug 11 2005, 07:52 PM
Post
#1
|
|
|
Newbie Group: Members Posts: 7 Joined: 11-August 05 Member No.: 6,943 Status:  Location: usa Drives: 1992 240  |
1992 240 gl will not start. went to tow it home the next day and it started then died out after only running for a minute. engine cranks but no spark from coil. when i got car home. i let it sit up over night . the next day i went out and wiggle wiring from flywheel pickup sensor my son then cranked over the motor and the car started and has ran ever since. the wiring from the sensor looks new (we just bought car six months ago).
so i dont know if there was a bad connection their. or what. what i like to know is how toc heck the engine codes without having to buy a test meter or having to take it to a shop any help thanks. |
 |
 
|
|
Aug 12 2005, 07:41 PM
Post
#2
|
|
 Veteran  Group: Super Mod Posts: 5,792 Joined: 5-November 04 Member No.: 1,295 Status: Location: Fl. Drives: Mustang,1995 Yellow T5-R,1996 850 Trubo |
|
|
|
|
|
Aug 12 2005, 08:02 PM
Post
#3
|
|
|
Newbie Group: Members Posts: 7 Joined: 11-August 05 Member No.: 6,943 Status: Location: usa Drives: 1992 240 |
thanks getting code 1-1-1
now i have a problem does computer store old codes or only show active codes |
|
|
|
|
Aug 12 2005, 08:13 PM
Post
#4
|
|
|
Veteran Group: Super Mod Posts: 5,792 Joined: 5-November 04 Member No.: 1,295 Status: Location: Fl. Drives: Mustang,1995 Yellow T5-R,1996 850 Trubo |
I think it just shows codes that are present.
How does the outer part of the speed sensor look? If it is cracked I would replace it.Most likely that is the problem. 111 means no codes present. |
|
|
|
|
Aug 16 2005, 09:53 AM
Post
#5
|
|
|
Newbie Group: Members Posts: 7 Joined: 11-August 05 Member No.: 6,943 Status: Location: usa Drives: 1992 240 |
now car will not start and it will not flash any codes
red light comes on with probe in socket #2 and button pressd' but when i release button it will not flash codes |
|
|
|
|
Similar Topics
| Topic | Replies | Topic Starter | Views | Last Action | |
|---|---|---|---|---|---|
 |
 1992 960 Bulb Failure RelayHow do you replace it? |
8 | Hawcha | 312 | 10th November 2008 - 10:25 AM Last post by: joekstlc |
|
1992 940 Turbo Idles Low And Dies idle prob or just dirty fuel components? |
12 | courseyrn | 527 | 19th October 2008 - 09:10 PM Last post by: driveforlife |
|
240gl Problems not firing in 1 and 3 |
9 | syco26 | 152 | 5th September 2008 - 08:59 PM Last post by: manxman |
|
1992 960 Rear Fog Light Bulb how to repalce fog light bulb |
2 | yamarx1 | 184 | 4th September 2008 - 02:49 AM Last post by: volvolover |
|
1992 Volvo 940 Turbo Diesel Basic Maintenance |
0 | laneystrider | 265 | 14th July 2008 - 02:52 PM Last post by: laneystrider |
Link To Us| If you found our site useful please link to us <a href="http://www.volvo-forums.com">Volvo-Forums.com</a>. |
Time is now: 3rd December 2008 - 07:33 PM |
||
| © 2004 Volvo-forums.com | ||
